enable mpls rsvp-te

enable mpls rsvp-te [{vlan} vlan_name | vlan all]

Description

Enables RSVP-TE for the specified MPLS-configured VLAN.

Syntax Description


vlan	Specifies that RSVP-TE is to be enabled on one or more VLANs.
`vlan_name`	Identifies a specific VLAN on which RSVP-TE is to be enabled.
vlan all	Enables RSVP-TE on all VLANS that have been added to MPLS.

Default

Disabled.

Usage Guidelines

When RSVP-TE is enabled, TE LSP establishment for configured LSPs begins and the processing of RSVP path/reserve messages from peer LSRs is permitted. By default, RSVP-TE is disabled for all MPLS-configured VLANs. Specifying the optional all keyword enables RSVP-TE for all VLANs that have been added to MPLS.

Example

The following command enables RSVP-TE on the specified VLAN:

enable mpls rsvp-te vlan vlan_1

History

This command was first available in ExtremeXOS 11.6.

Platform Availability

This command is available only on the platforms that support MPLS as described in the Switch Engine v33.1.1 Licensing Guide document.